CHASSIS WIRE DRESSING DETAIL -5
CHASSIS WIRE DRESSING DETAIL -6
KD-32XS945
Add gasket to Antenna Switch
next to Fpin cables
Gasket will be between Ant switch and
Q-box
1-900-805-24 gnd wire is dressed in
wire clamp p/n 4-857-472-01
wire is dressed BEFORE securing
position of Antenna Switch
XS Models do NOT have Sub-Tuner Pin-Plug Cable
XS Models do NOT have iLINK (iEEE) Cable.
F-pin to F-pin cable 1-829-702-11
connect like this
Add Ferrite core 1-543-393-11
(place in the middle of cable)
Note position (rotation of right angle connector)
of cable/ferrite Do NOT dress the ferrite core so
it can touch the Heat Sink on the POD connector
KD-32XS945
15