Sony KD-32NX100U Quick Start Manual

KD-32NX100U
Thank you for purchasing this
Sony Trinitron Digital Television.
Follow this step by step guide to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to
your TV.
Tune your TV.
View TV programmes.
4-206-398-02
Checking the supplied
1
accessories
The following accessories are included with your TV.
RF Loopthrough cable
Remote Control
Inserting batteries into
2

the remote control

1 2
Place a coin in the slot Insert the batteries as
provided at the bottom of indicated in battery
the remote control. Turn compartment.
anti clockwise to release
the battery compartment.
Always remember to dispose of batteries in an environmentally friendly way.
3
Connecting an aerial only
Supplied RF
loopthrough
cable
1. Connect your existing aerial lead to the Digital socket marked
rear of the TV as shown.
2. Connect the supplied RF loopthrough cable from the socket marked
to the analogue socket marked
Batteries
Connecting an aerial and a VCR
Scart lead
(not supplied)
1. Connect your existing aerial to the Digital socket marked
TV as shown.
2. Connect the supplied RF loopthrough cable from the lower socket marked
3
on the TV to the RF IN socket on your VCR.
3. Connect a lead from the RF output of your VCR to the Analogue socket
Replace the battery
marked
compartment and lock in
4. Connect a scart lead from the socket marked
place by twisting coin
to the scart socket of your VCR (refer to VCR instructions).
clockwise in slot.
5. Connect the VCR to the mains socket and switch on.
6. Insert a pre-recorded tape into the VCR and press the 'PLAY' button. This
enables the TV to locate and store the video channel during the 'Automatically
tuning the TV' procedure.
Connecting an aerial
and a VCR
.
on the rear of the
on the TV.
3 on the rear of the TV
3 s
Existing
aerial
on the
RF lead
(not supplied)
RF loopthrough
cable (supplied)