Section 1: Disassembly; 1-1. Rear Cover Removal; 1-2. Chassis Assembly Removal; 1-3. Service Position - Sony TRINITRON KD-32XS945 Service Manual

1-1. REAR COVER REMOVAL

5 Screws
+BVTP 4 x 16
TYPE2 TT (B)

1-2. CHASSIS ASSEMBLY REMOVAL

1
Lift lever up on the right and left sides of the chassis
bracket and gently pull the chassis assembly away from
the bezel.
KD-32XS945

SECTION 1: DISASSEMBLY

4 Screws
+BVTP 4 x 16
TYPE2 TT (B)

1-3. SERVICE POSITION

CAUTION! - Heat sink on IC5004 is -15V. Do not to allow
heat sink to touch GND or any other components.
Heat sink on Q8018 VpK=250V. Do not touch or short to
GND or other components.
CAUTION! - Pay attention to Neck Assembly WY Board wire
harness to B Board. The WY Board can easily break if there
is sudden or excessive tension on the harness.
1
Lift lever up on the right and left sides of the chassis bracket
and gently pull the chassis assembly away from the bezel.
2 Pull up and rotate both the A and D Boards in order to
service the unit.
KD-32XS945
Rear Cover
5 Screws
+BVTP 4 x 16
TYPE2 TT (B)
11