Digital Output Signal Chart - JVC XV-N5SL Instructions Manual

Jvc dvd video player instructions
Hide thumbs Also See for XV-N5SL:
Table of Contents

Advertisement

Available languages

Available languages

Changing the initial settings

Digital output signal chart

Disc type
DVD with 48/44.1 kHz, 16/20/24
bit linear PCM
DVD with 96/88.2 kHz, 16/22/24
bit linear PCM
DVD with DTS
DVD with Dolby Digital
DVD with MPEG Multichannel
Audio CD/Video CD/SVCD
Audio CD with DTS
CD-R/RW with MP3
Menu item
ANALOG DOWN MIX
To correctly play the audio on a
DVD VIDEO disc recorded with
surround multichannel audio, you
must set this item properly
according to your audio system
configuration.
D. RANGE COMPRESSION
This setting provides optimal audio
quality for listening to DVD VIDEO
discs recorded in Dolby Digital
format, at low or middle volume.
52
PCM ONLY
48/44.1 kHz,16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear PCM
48 kHz, 16 bit, stereo linear
PCM
48 kHz, 16 bit, stereo linear PCM
44.1 kHz, 16 bit, stereo linear PCM
Setting options
• DOLBY SURROUND
Should be selected when listening
to multichannel surround audio
when the unit's analog AUDIO OUT
terminals are connected to a
surround decoder.
• STEREO
Should be selected when listening
to conventional two-channel stereo
audio when the unit's analog
AUDIO OUT terminals are
connected to a stereo amplifier/
receiver or television set, or when
you want to record the audio from
a DVD VIDEO disc to MiniDisc,
cassette, etc.
• AUTO
Audio is played back with the
dynamic range compressed
except when playing a disc
recorded with Dolby Digital 1- or 2-
channel format.
• ON
Audio is always played back with
the dynamic range compressed.
Output
DOLBY DIGITAL/PCM
No output
Dolby Digital bitstream
44.1 kHz,16 bit, stereo linear PCM
No output
• This function does not work when
the 3D PHONIC function is activated
(see page 35).
• This setting affects only the output
signal from the analog AUDIO OUT
jacks when playing back a DVD
VIDEO disc recorded with surround
multichannel audio.
• This function works only when
playing back a disc recorded with
Dolby Digital. The setting does not
affect audio from other discs.
• This function does not work when
the 3D PHONIC function is activated
(see page 35).
STREAM/PCM
DTS bitstream
MPEG bitstream
DTS bitstream
Notes/examples

Advertisement

Table of Contents
loading

Table of Contents