To Select A Scene Angle Of Dvd Video [Angle] - JVC XV-N5SL Instructions Manual

Advanced operations
To select a scene angle of DVD VIDEO
[ANGLE]
You can enjoy a variety of scene angles if the DVD VIDEO
disc contains "multi-angle" parts, where multiple
cameras were used to shoot the same scene from
different angles.
• At the beginning of a "multi-angle" part,
TV screen (except when the "ON SCREEN GUIDE"
preference is set to "OFF"). See page 53 for details about
"ON SCREEN GUIDE" preference.
OPEN/
CLOSE
TV1
1
TV4
4
TV7
7
TV-/--
10
RETURN SUBTITLE
CH
+
VOL-
ENTER
CH
-
PREVIOUS
CLEAR
SLOW-
REPEAT SUB TITLE
ANGLE DIGEST ANGLE
3D
PHONIC
RM-SXV010U
REMOTE CONTROL
From the Angle selection window
¶ During DVD VIDEO playback
(except when the status bar is shown)
1
Press ANGLE.
The Angle selection window appears on the TV
screen.
1/3
1
2
Use ANGLE or 5/∞ to select the desired
angle.
Each time you press ANGLE or 5/∞, the angle
changes.
Example:
1/3
2/3
3/3
32
Available :
appears on the
TV DVD
STANDBY/ON
TV DVD
TV2 TV3
2 3
TV5 TV6
5 6
TV8 TV9
8 9
TV0 MUTING
0 +10
TITLE/ TV/VIDEO
GROUP CANCEL
5/∞/2/3
VOL+
ENTER
NEXT
3
SELECT STROBE
SLOW+
AUDIO VFP
ZOOM
AMP VOL
3
Press ENTER.
You can see the picture from the selected angle.
The angle selection window is dismissed.
From the angle list
¶ During DVD VIDEO playback
1
Press and hold ANGLE for more than 1
second.
Up to nine camera angles recorded on a disc
appear on the TV screen.
The selected camera angle
2 Use 5/∞/2/3 to select the desired angle.
3
Press ENTER or 3.
The unit starts playback using the selected angle on
the full-sized screen.
NOTES
• The Angle selection window will automatically
disappear if you do not change the angle for several
seconds.
• When appears on the TV screen in step 1:
The current scene is not recorded from multiple angles.
• During the operation from the angle list display, audio is
muted.
• You can also select the angle via the menu bar. See
page 38.