Bluetooth ® Audio; Media Format; Setting Bluetooth; Audio - Subaru 2014 Impreza Owner's Manual

5-32
®
Audio/Bluetooth

audio

NOTE
. The Bluetooth
®
audio function may
not operate properly under the follow-
ing conditions.
The device is turned off.
The battery of the device has run
down.
The device is not connected to
the system.
The device is behind the seat or
in the glove box.
A metal material is covering or
touching the device.
. Depending on the type of device that
is used, operation and sound volume
may be different from normal use of
those devices.
. The sound quality may degrade due
to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.
. When another Bluetooth
simultaneously connected, noise may
be heard.

Media format

®
Bluetooth audio devices cannot be
connected if they are not compatible with
®
the following Bluetooth profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)

Setting Bluetooth

MENU button
(type A audio)
TUNE/TRACK/CH
dial
Type A audio:
1. Select the BT-A SETUP menu by
pressing the MENU button. For details,
refer to Other settings (type A audio)
8.
2. Perform the following procedure by
operating the
®
while BT-A is displayed.
device is
Type B audio:
1. Select the BT Audio Setup menu by
operating the TUNE/TRACK/CH dial. For
details, refer to Audio settings (type B
audio) 5-8.
2. Perform the following procedure by
operating the
while BT Audio is displayed.
NOTE
You cannot set Bluetooth
driving.
®
audio
NOTE
Only one device can be registered.
1. Select the following menu.
If a device is already registered, MEM-
ORY FULL will be displayed and the
mode will change to the Bluetooth
setting mode.
2. After the passkey is shown on the
display, input the passkey into the device.
5-
TUNE/TRACK/CH dial
NOTE
After the ignition switch is turned to the
TUNE/TRACK/CH dial
device will not be automatically con-
nected to the system even if the
®
audio while
Registering (pairing) device
PAIR AUDIO (type A audio)
Pair Audio Player (type B audio)
If you input the correct passkey,
PAIRED will be displayed and the
registration procedure will be finished.
If you input an incorrect passkey,
FAILED will be displayed, the regis-
tration procedure will not be success-
ful and the mode will change to the
®
Bluetooth audio setting mode.
LOCK (off) position, the registered
®
audio