Rear Combination Lights - Subaru 2014 Impreza Owner's Manual

Rear combination lights

4-door models
1. Remove the clips from the trunk trim
with a flat-head screwdriver.
2. Open the rear portion of the trunk trim
panel as illustrated.
NOTE
*
Make sure that the part of the trunk
trim in the illustration does not contact
*
the trunk lid stay. If the part is bent,
the trunk trim may be torn.
1) Stop light/Tail and rear side marker light
2) Rear turn signal light
3) Backup light
3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
Maintenance and service/Replacing bulbs
6. Secure the rear trunk trim panel with
the clips.
5-door models
1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.
11-39
CONTINUED