Dome light and cargo area
light
Dome light
Cargo area light
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the lens.
Trunk light
1. Remove the cover by squeezing its
sides and pulling it.
2. Pull the bulb out of the socket.
3. Install a new bulb.
4. Reinstall the cover.
Maintenance and service/Replacing bulbs
High-mounted stop light
(4-door)
1)
Trunk light
1. Open the trunk and locate the elec-
trical connector of the high-mounted stop
light that is wired near the trunk light by
referring to the illustration.
2. Disconnect the electrical connector by
unlocking its retainer. Then, enter the rear
cabin.
11-43
CONTINUED