Method of camera installation
Using the two-gang junction box
Mount the camera on the two-gang junction box by fixing 4 screws (locally procured) (☞ page 15).
Camera attachment
Note:
• For mounting on the wall, mount the attachment with the dent facing upward.
• For installation on the ceiling, the model No. will be indicated on the opposite side of the dent
of the attachment. Make sure the direction for installation.
Installing the camera directly on the ceiling or wall
Mount the camera by fixing 4 screws (locally procured) (☞ page 15).
Camera attachment
16
46 mm {1-13/16 inches}
Two-gang junction box
Cable access hole
ø27mm {1-1/16 inches}
32mm {1-1/4 inches}
Center of camera attachment
83.5 mm {3-9/32 inches}