Samsung MH026FNCA Service Manual page 37

Disassembly and Reassembly
No Parts
3 Evaporator The Evaporator should be disassembled
after disassembling the Cover Control
1-3) and the Drain Pan 2-1), 2-2), 2-3).
1) Disassemble the Cover Pipe that fixes
the high/low pressure Pipe.
- Unscrew 2 screws
(Use +Screw Driver.)
2) Disassemble the refrigerant temperature
sensor, Inlet air temperature sensor, and
EEV wire that connected to the inside of
PCB.
3) Disassemble the Support Evap. LF that
fixes the Evaporator.
- Unscrew 2 screws
(Use +Screw Driver.)
4) Disassemble the Support Evap RH.
- Unscrew 2 screws
(Use +Screw Driver.)
4-8
Procedure Remark
Samsung Electronics