Samsung MH026FNCA Service Manual page 33

Disassembly and Reassembly
No Parts
4 Heat Exchanger 1) Loosen 2 fixing earth screws of right side.
(Use +Screw Driver.)
2) Detach the Connection Pipe.
3) Detach the Holder Pipe at the rear side.
4) Loosen the 4 fixing screws of right and
left side. (Use +Screw Driver.)
5) Lifting the Heat Exchanger up a little to
push the up side for separation from the
indoor unit.
1) Loosen the fixing screw.
5
Fan Motor
2) Detach the Fan Motor from the Fan.
&
3) Detach the Fan From the left Holder
Cross Fan
Bearing.
4-4
Procedure Remark
Samsung Electronics