Disassembly and Reassembly
No
Parts
4) Disassemble Motor Wires connected to
the inside of PCB and connected to the
Capacitor.
5) Disassemble the Motor earth wire
connected to the Partition.
- Unscrew a screw
(Use +Screw Driver.)
6) Disassemble the band Motor for fixing
the Motor.
- Unscrew 2 screws
(Use +Screw Driver.)
7) After disassembling the Motor and Blower
for the set, disassemble the Blower by
use of 0.12inch(3mm) wrench.
4-6
Procedure
Remark
Samsung Electronics