Samsung MH026FNCA Service Manual page 27

Alignment and Adjustments
Step 3 : Upon completion of the selection, check you made right selections.
Whenever you press the
Step 4 : Pressing the ON/OFF button (
When pressing the operation ON/OFF key with the direction of remote controller for unit, the sound "Ding" is heard and the
OPERATION LED lamp is flickering at the same time, then the input of option is completed. (If the "ding" sound isn't heard, try
again pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote controller.
Second, Re-insert the battery into the remote controller.
Third, Press ON/OFF (
• Error Mode
1 If all lamps of indoor unit are flickering, Plug out, plug in power plug again and press ON/OFF key to retry.
st
2 nd If the unit is not working properly or all lamps are continuously flickering after setting the option code, see if the
correct option code is set up for its model.
3-8
button, the set Option will be displayed.
)
) key with the direction of remote controller for set.
Samsung Electronics