Table of Contents
Advertisement
Getting started
To connect to an audio amplifier or receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
The unit
VIDEO S-VIDEO
AV COMPU LINK
VIDEO OUT
NTSC
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL or COAXIAL) to the
digital input of an amplifier, MD, etc. by using an optional digital cable. The digital audio signal from a disc is directly
transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an
optional digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
The unit
VIDEO S-VIDEO
AV COMPU LINK
VIDEO OUT
SELECT
NTSC
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "AUDIO" page of the preference display correctly according to the connected audio equipment. If the "DIGITAL
AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
"DIGITAL AUDIO OUTPUT" on page 54.
• With the digital connection, the COMPRESSION setting in the AUDIO page of the preference display are invalid. Settings for
these items must be made from the decoder.
18
VIDEO OUT
COMPONENT
Y
P
P
B
R
AUDIO OUT
DIGITAL OUT
PCM / STREAM
COAXIAL
OPTICAL
L
SELECT
ATTENUATOR
PAL
OFF
ON
R
Red
White
Audio cable
(not supplied)
VIDEO OUT
COMPONENT
Y
P
P
B
R
AUDIO OUT
DIGITAL OUT
PCM / STREAM
COAXIAL
OPTICAL
L
ATTENUATOR
OFF
ON
PAL
R
Red
White
Coaxial digital cable
(not supplied)
Audio cable
(not supplied)
Amplifier or receiver
IN
White
LEFT
RIGHT
Red
When using the DIGITAL OUT (OPTICAL)
jack, remove the protection cap. Do not
lose the removed cap. When the DIGITAL
OUT (OPTICAL) jack is not used, fix the
protection cap into the jack.
Optical digital cable
(not supplied)
Digital equipment
IN
White
LEFT
AUDIO
RIGHT
Red
AUDIO
IN
OPTICAL
DIGITAL
COAXIAL
Advertisement
Table of Contents
