Instrumentation; Control Panel - Volvo Penta D2 Series Operator's Manual

Instrumentation

This section describes the instrument panels available as standard alternatives for your engine from Volvo
Penta, for Volvo Penta optional extra instruments see next section. Note that in certain boats instruments, alarm
panels, key switches etc. may be installed separately without the instrument panels shown here.
If you want to install additional instrumentation, or your boat is equipped with instruments not described here,
please contact your Volvo Penta dealer.
1
2
4
The system does not have an ignition switch. To stop
unauthorized persons starting the engine the wheel-
house should have a lock or a lockable main switch
should be used.

Control panel

On/Off button (). Press this button to engage or turn
off the system.
NOTE! The control panel can not be turned off while
the engine is running.
Start button (4), when this button is pressed the glow
function is activated and the starter motor is engaged.
Multifunction button ().
-
3
4
-
-
Stop button (3). The engine stop running when this
button is pressed.
Alarm acknowledgment. If there is an alarm the
LCD screen on the tachometer will show a flashing
alarm warning and the alarm buzzer sound.
The alarm is acknowledged by pressing the mul-
tifunction button. The alarm buzzer stops and the
alarm warning continues to show in a steady light
until the malfunction is corrected.
Background lighting. Used to light up and exting-
uish background lighting of the tachometer LCD
screen. Press the button -5 seconds to light or
extinguish background lighting.
Background lighting can be adjusted in five stages
by pressing the multi function button less than 
second.
Contrast adjustment of the tachometer LCD
screen, press the button for more than 5 seconds
to adjust contrast.
IMPORTANT! Read the starting instructions in
the "Starting the engine " chapter.