Getting Started; Connections; Before Making Any Connections; To Connect To A Tv, Monitor, Or Projector With The Audio Input And Video Input Jacks - JVC XV-D701BK Instructions Manual

Getting started

Connections

Before using the unit, you have to connect the unit to a TV or amplifier. By connecting to an amplifier which has a
digital terminal or Dolby digital capability, you can enhance the sound quality.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you wish to connect.
To connect to a TV, monitor, or projector with the audio input and video input
jacks
You can enjoy using the unit by simply connecting it to a television set. To hear improved audio sound quality,
connect the audio outputs to your audio equipment. (See the following pages.)
VIDEO OUT
VIDEO S-VIDEO
FRONT
LEFT
RIGHT
ANALOG
Yellow
Connect the unit to a television set equipped with stereo audio input and video input jacks using the supplied audio/
video cables.
• If your television set has a monaural audio input instead of stereo, you need to use an optional audio cable which
converts stereo audio output to monaural.
• If your television set has an S-video input, you should connect it with the S-VIDEO output of the unit using the
supplied S-video cable in addition to the (standard) video connection to get better picture quality.
NOTE
¶
Connect VIDEO OUT of the unit to the video input of a television set. Connecting VIDEO OUT of the unit to a TV
via a VCR may cause a monitor problem when playing back a copy-protected disc.
¶
Do not connect the player to a NTSC system. Connect it to a PAL system.
12
The unit
AV OUT
AV
Y/C COMP.
REAR CENTER
PCM/STREAM
OPTICAL COAXIAL
SUBWOOFER
DIGITAL
AUDIO OUT
White
Red
Audio/video cable
(supplied)
S-video cable
(supplied)
TV, monitor, or projector
IN
Yellow
Red
White
S-VIDEO
VIDEO
RIGHT
AUDIO
LEFT