To Use The Remote Control Unit For Satellite Tuner Operation - JVC XV-D701BK Instructions Manual

Manufacturer's code list
No. Manufacturer
01 AMSTRAD
02 AMSTRAD
03 AMSTRAD
04 RFT/ANKARO/QUADRAL/
SKYMASTER
05 RFT
06 KATHREIN
07 KATHREIN
08 KATHREIN/MASPRO
09 KATHREIN/PHILIPS
10 NOKIA
11 NOKIA/GRUNDIG
12 GRUNDIG/SIEMENS
13 PAGE
14 TECHNISAT
15 WISI
16 WISI/RADIX
17 FUBA/SEG
18 FTE

To use the remote control unit for satellite tuner operation

You can operate the satellite tuner with the remote control unit. To operate it, you
have to change the remote control signal. Also refer to the manual supplied with
it.
Changing the remote control signal
TV
1 DVD SAT.
Set on the remote control unit to SAT.
SATELLITE
/
2
Press and hold , then press
SATELLITE
Do not release . Keep holding
/
SATELLITE
3
/
Holding , enter the manufacturer's code (two digits) using
See the lists on the right to find the manufacturer's code.
SATELLITE
4
/
Release .
The following buttons can be used for operating the satellite tuner (with
TV
DVD SAT. set to SAT.):
Turns the satellite tuner on or off.
SATELLITE
/
+
Changes the channels.
CH
–
0 9
to Selects the channels.
5
Try to operate the satellite tuner by pressing
If the satellite tuner turns on or off, you have entered the correct code.
NOTE
¶
If there is more than one code listed for your brand of the satellite tuner, try
each one until the correct one is entered.
.
SET
SATELLITE
/
until the next step is completed.
SATELLITE
/
.
Getting started
English
Français
0 9
to .
19