Skoda 2009 Yeti Owner's Manual page 26

A
on the windshield wiper lever
B
the multifunction steering wheel*
for the first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Note
The amount of fuel consumed will not be indicated.
Range
The estimated range in kilometres is shown on the display. It indicates the distance
you can still drive with your vehicle based on the present level of fuel in the tank for
the same style of driving.
The readout is shown in steps of 10 km. After lighting up of the indicator light for the
fuel reserve the display is shown in steps of 5 km.
The fuel consumption for the last 50 km is taken as a basis for calculating the range.
If you drive in a more economical manner from this moment on, the range will be
increased accordingly.
If the memory is set to zero (after disconnecting the battery), the fuel consumption
of 10 ltr./100 km is calculated for the range; afterwards the value is adapted accord-
ingly to the style of driving.
Distance driven
The distance driven since the memory was last erased appears in the display
⇒ page 22. If you wish to measure the distance driven of a particular time, you
must set the memory to zero at this moment in time by pressing the button
⇒ page 22, fig. 22
the windshield wiper lever
⇒ page 23, fig.
function steering wheel*
The maximum distance indicated in both switch positions is 9 999 km. The indicator
is set back to null if this period is exceeded.
Using the system Safety
⇒ page 22, fig. 22
or with the handwheel
⇒ page 23, fig.
23. A zero appears in the display
A
or the handwheel on the multi-
D
23.
Driving Tips
A Average speed
on
D
The average speed since the memory was last erased is shown in the display in
km/hour ⇒ page 22. If you wish to determine the average vehicle speed over a
certain period of time you must set the memory to zero at the start of the measure-
A
ment using the button
A
the handwheel on the multifunction steering wheel*
D
A zero appears in the display for the first 100 m you drive after erasing the memory.
The indicated value will be updated every 5 seconds while you are driving.
Current speed*
The current speed which is identical to the display of the speedometer, is indicated
A ⇒ page 17, fig.
on the display
2
Warning against excessive speeds*
A
on
B
General Maintenance
Instruments and Indicator/Warning Lights
⇒ page 22, fig. 22
on the windshield wiper lever
B
⇒ page 23, fig.
18.
Fig. 25 Warning against
excessive speeds
Breakdown assistance
25
or with
23.
Technical Data