Apop Authentication; Receiving Internet Faxes; Tcp/Ip Settings; Internet Fax Function - Oce cm3522 User Manual

Setup items by operation
1.16

Receiving Internet faxes

Specify settings for receiving Internet faxes.
In order to use the Internet fax function, setting by a service engineer is required. For details, contact your
service representative.
The Internet fax function sends and receives scanned originals as an attached file (TIFF format) via the
intranet (internal company networks) or Internet. This via-intranet or -Internet communication largely reduces
the communication cost as compared with general fax messages.
Performing APOP authentication when receiving an Internet fax ensures safer communication.
Specify the settings according to the following flowchart.
Communicate with the POP
server using SSL?
POP over SSL
Note
For details on registering I-Fax addresses, refer to
destination" on page
For details on the Internet fax operation, refer to the User's Guide [Network Scan/Fax/Network Fax
Operations].
1.16.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
1.16.2

Internet Fax Function

Enable the Internet fax function of this machine.
For details, refer to
Océ cm3522/cm2522
Yes No
1-153.
"Specifying general settings for TCP/IP-based communication" on page
"Internet Fax Function" on page
TCP/IP Settings
Internet Fax Function
E-mail RX (POP)
I-Fax Advance Setting
Finish
"Registering or editing an address book
1-46.
APOP?
Yes No

APOP Authentication

1-2.
1
1-52