Sending An Internet Fax; Tcp/Ip Settings - Oce cm3522 User Manual

Setup items by operation
1.15

Sending an Internet fax

Specify settings for sending an Internet fax.
In order to use the Internet fax function, settings by a service engineer is required. For details, contact your
service representative.
The Internet fax function sends and receives scanned originals as an attached file (TIFF format) via the
intranet or Internet. This via-intranet or -Internet communication largely reduces the communication cost as
compared with general fax messages.
Communication by combining POP before SMTP, APOP, SMTP authentication or encryption using SSL/TLS
is available. For details, refer to
Specify the settings according to the following flowchart.
Communicate with the SMTP
server using SSL/TLS?
Yes
SMTP over SSL/Start TLS
Note
For details on registering I-Fax addresses, refer to
destination" on page
For details on the Internet fax operation, refer to the User's Guide [Network Scan/Fax/Network Fax
Operations].
1.15.1

TCP/IP Settings

Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
Océ cm3522/cm2522
"Sending scan data by E-mail" on page
TCP/IP Settings
Internet Fax Function
Regist machine informa-
Header Information
E-mail TX (SMTP)
I-Fax Advanced Setting
SMTP Authentication?
No
SMTP Authentication
1-153.
"Specifying general settings for TCP/IP-based communication" on page
tion
Yes No
No
Finish
"Registering or editing an address book
1-23.
POP before SMTP?
Yes
POP before SMTP
POP over SSL?
APOP?
Yes
POP over SSL
APOP Authentication
1-2.
1
No
1-45