Modifying An Existing Configuration File; Retrieving And Modifying A Configuration File From An Mk2200; Cloning An Mk2200 Configuration File To Multiple Mk2200S - Symbol MK2200 MicroKiosk Product Reference Manual

Modifying an Existing Configuration File

To edit an existing configuration file:
From the RDM on the host computer, choose
1.
Configuration Utility
Select a configuration file (with a .reg extension) to edit and click OK.
2.
Only open files created by the RDM, System Menu, or Save Configuration. Loading other
NOTE
registry files can cause file corruption.
Make the necessary changes to the default values in the configuration file. See
3.
page 3-6 for these options. Also see
for
MK2200 Configuration Utility
To save the changes, choose
4.
for the file. Note that you cannot change the Domain (product) of an existing configuration file.

Retrieving and Modifying a Configuration File from an MK2200

From the
1. RDM
Select
2. Tools > Retrieve Remote Configuration File
MK2200 to the host computer. This launches the
configuration file is unavailable in the device, RDM opens the
default factory settings.
Make the necessary changes to the default values in the configuration file. See
3.
page 3-6 for these options. Also see
for
MK2200 Configuration Utility
In the
4. MK2200 Configuration Utility
transfer the updated configuration file back to the original MK2200.
Alternatively, configure the RDM to automatically cold boot the MK2200 device after a download
5.
completes. Select
NOTE To reboot manually instead, in the RDM, select the MK2200 device, then select Actions > Cold Boot.
Allow approximately one minute for the MK2200 to reboot and reconnect, then select View > Refresh to verify
the device rebooted successfully.

Cloning an MK2200 Configuration File to Multiple MK2200s

To use one MK2200 configuration file to configure other MK2200s:
In the RDM, select the MK2200 with the configuration file to use.
1.
Select
2. Tools > Retrieve Remote Configuration File
open the
MK2200 Configuration Utility
In the
3. MK2200 Configuration Utility
Specify the location for the configuration file to be saved on the host PC, and click OK.
4.
window.
Figure 4-7
window data entry field types used when changing configuration options.
to overwrite the old file, or select
File > Save
screen, select the device from which to retrieve the configuration file.
Figure 4-7
window data entry field types used when changing configuration options.
window, select
to open the
Tools > Options
window.
window, select
Remote Device Manager 4 - 13
Tools > Open Local Configuration File
for a sample screen, and
to retrieve the MK2200 configuration file from the
MK2200 Configuration Utility
MK2200 Configuration Utility
for a sample screen, and
File > Save to Remote Device
screen, and check
RDM Options
to transfer the configuration file to the host computer and
.
File > Save As
to open the
MK2200
Default Parameters on
Data Entry Formats on page 4-28
to specify a new name
Save As
window of the RDM. If a
window with the
Default Parameters on
Data Entry Formats on page 4-28
to save the changes and
Auto reboot after download
.