Downloading The Configuration File To The Mk2200 - Symbol MK2200 MicroKiosk Product Reference Manual

This option reads the current content of the mkcofig.reg file, allows user changes, then writes them back
to the mkcofig.reg file. The window shown in
mkconfig.reg file. Tap an item listed in the left window pane to display current mkconfig.reg file
information. Edits are permitted to the current file information in the text boxes that appear in the right
pane. Tap
File > Save
If upgrading the MK2200 OS and a configuration (.reg) file was created using an older OS
NOTE
version, you must create a new .reg file (see
more information about upgrades, see

Downloading the Configuration File to the MK2200

Before downloading the configuration file (.reg file) to the MK2200
In MK2200 Configuration Utility window, select
rename the file mkconfig.reg, and click Save.
Use one of the following methods to download the file to the MK2200:
Use the RDM to "push" the file to the MK2200(s) (see
•
Using the RDM on page
Copy the mkconfig.reg file to the MK2200
•
Downloading the Configuration File Using ActiveSync on page
Send the file to the MK2200
•
software) or AirBeam.
Copy the mkconfig.reg file to a PCMCIA card, then transfer the file into the MK2200
•
Downloading the Configuration File Using ActiveSync
To copy the mkconfig.reg from the host computer to the MK2200
using ActiveSync:
Connect the MK2200 to the host computer by connecting the USB cable (Symbol p/n 25-64626-01) to the
1.
RS-485 port on the MK2200, and the other end to a USB port on the host computer.
In ActiveSync on the host computer, click
2.
the MK2200.
Open a new Windows
3.
Right-click on the file and select
4.
Right-click in the MK2200
5.
file (if present).
Use the RDM or System Menu to enable ActiveSync support in the MK2200 if support is
NOTE
disabled.
Figure 3-2
to save changes and write them to the mkconfig.reg file.
Appendix G, OS Upgrade
File > Open
4-14).
Application
folder using FTP (see the instructions provided with the FTP
Application
Explore
®
Explorer and browse the host computer to locate the file.
.
Copy
folder and select
Application
reads and displays the current contents of the
Creating a Configuration File on page
Procedures.
folder, rename it mkconfig.reg.
Application
and select the file, then select
Downloading the Configuration File to the MK2200
folder using a USB ActiveSync connection (see
3-3).
folder (
Application
®
. Windows Explorer opens the Mobile Device window for
. A prompt requests to overwrite the existing
Paste
Configuration 3 - 3
4-12). For
,
File > Save As
folder.
Application
)
My Computer/Application