Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt D27105 Instruction Manual

FLIP-OVER SAW D27105, D27105V
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical data

Type
Voltage
Power input
Power output
Max. blade speed
Blade diameter
Blade bore
Blade body thickness
Riving knife thickness
Automatic blade brake time
Weight
Cutting capacities
Mitre saw mode
Mitre (max. positions)
Bevel (max. positions)
Max. crosscut capacity at 90°
Max. mitre cut capacity at 45°
Max. depth of cut 90°
Max. depth of bevel cut 45°
Max. depth of cut at 45° bevel, 45° mitre
Saw bench mode
Max. ripping capacity left/right
Depth of cut at 90°
Depth of cut at 45°
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029 and
may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
WALT one of the most reliable
E
D27105/D27105V
3
V 115
W 1730
W 860
-1
min 3500
mm 305
mm 30
mm 3.2
mm 2.5
s < 10
kg 42
left 48°
right 48°
left 48°
right 2°
mm 205
mm 160
mm 90
mm 60
mm 60
mm 120/320
mm 80
mm 56
dB(A) 95.0
dB(A) 3.0
dB(A) 106.0
dB(A) 3.0
2.1
m/s²
m/s² 1.5
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.25 Ω at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
D27105/ D27105V
D WALT declares that these products described under "technical data" are
E
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
These products also comply with Directive 2004/108/EC. For more
information, please contact D
E
back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
29.12.2009
E N G L I S H
115 V tools 16 Amperes
WALT at the following address or refer to the
WALT.
E
13