8. NOTE: Windshield washer fluid should be collected in a container after the windshield washer hoses are disconnected.
Disconnect the windshield washer hoses.
9. Remove the windshield washer reservoir.
10. Remove the windshield washer pump if necessary.
Installation
1.
CAUTION: Do not operate the windshield washer pump prior to filling the windshield washer reservoir.
To install, reverse the removal procedure.
Fill the windshield washer reservoir with Ultra-Clear Windshield Washer Concentrate C9AZ-19550-AC or BC or equivalent meeting Ford specification ESR-M17P5-A.