Table of Contents
Advertisement
Setting up your D1110
Date and time
Providing you have subscribed to your network's Caller Display
service, the date and time is set automatically for all handsets
when you receive your first call.
The date and time is recorded with each answer machine
message you receive.
If you do not have a Caller Display service you can set the date
and time manually.
Set date and time manually
u
d
Menu
Clock & Alarm
1. Press
and scroll
or
to
Select
.
Date & Time
Select
2.
is highlighted. Press
.
3. Enter the date using the format DD/MM/YY e.g. 01 09 08
for 1st September 2008. Enter the time in 12 or 24 hour
Save
time format. Press
. To change the Time Format see
page 14.
>
Back
4. Press
or
until you return to standby.
Your D1110 is now ready for use.
Getting to know your phone
2. Getting to know your phone
Overview of your handset
then press
A
Earpiece
B
Display
See page 6 for an overview of the display icons.
C
Option button (left)
Press to open the Menu.
Press to select options displayed on screen.
D
Option button (right)
In standby, press to open the phonebook menu, page 9.
Press to select options displayed on screen.
E
Redial/ Up
In standby, press to open and scroll through the Redial list,
page 9.
In talk mode, press to adjust volume.
In menu mode, press to scroll through the options.
When storing an entry in the phonebook, press and hold to
enter a Pause, page 26.
F
Talk/ Handsfree
In standby mode, press to make and receive calls, page 8.
In talk mode, press to switch handsfree on and off, page 9.
G
End call/ Power on/off
Press to end a call, page 8.
In menu mode, press to return to standby.
In standby, press and hold to switch the handset off. When off,
press to switch the handset back on.
H
Phonebook/ Down
In standby, press to open and scroll through the Names list,
page 10.
In talk mode, press to adjust volume.
In menu mode, press to scroll through the options.
I
Navigator glow ring
Illuminates when the phone is in use. Flashes to indicate new
event, eg. missed call.
J
*
Press and hold to switch between Tone and Pulse dialling,
page 12
K
#/ Lock
Press and hold to lock the keypad, page 9.
Unlock
To unlock, select
and follow the on screen instructions.
L
Int (Intercom)
Used for internal calls, page 23.
M R (Recall)
For use with switchboard/PABX.
5
Advertisement
Table of Contents
