Table of Contents
Advertisement
NOTE
If only one handset is registered the display prompts "Not
available" and returns to the previous screen. You must register
additional handsets before the handsets will be displayed and
make Internal calls.
NOTE
If the Room Monitor is triggered to call a handset or number and
the called handset is on a call, an alert tone of 3 beeps will be
heard. If the Room Monitor is triggered continuously the alert
beap will be emiitted every 5 seconds.
WARNING
This product is not intended for use as a baby safety device and
is not a substitute for adult supervision.
Answer machine
12. Answer machine
Your D1110 can digitally record up to 30 minutes of messages
or up to 59 messages. Each message can last up to a
maximum of 3 minutes. As well as recording incoming
messages, you can record memos for other users.
You can operate your answer machine from:
• the base.
• the handset.
DTMF
• remotely, from any other
telephone, see page 19.
You will need to set the date and time (if you have not already
done so) so that you will know when each message was
received, see page 14.
Base control keys
o
Press to turn the answer machine on/off
Press and hold to enter the outgoing message (OGM)
selection mode
P
Press to play all stored messages
Press to pause or resume playback
s
Press to stop message playback
r
Skip to the next message during message playback
Select Answer Only OGM during OGM selection mode.
l
Replay current message
Press twice to skip back to previous message
Select Answer & Record OGM during OGM selection
mode.
x
Delete current message during message playback
Press to delete personal OGM during OGM playback.
The pre-recorded OGM is selected and played.
+
Increase speaker volume during message playback
-
Decrease speaker volume
For more information on outgoing messages (OGM), see
page 18.
Switch the answer machine on / off
d
Menu
Answer Machine
1. Press
, scroll
to
and press
d
Answer On/Off
Select
2. Scroll
to
and press
u
d
On
Off
3. Scroll
or
to highlight
or
and press
switched on, the handset display shows
This can also be done via the base by pressing
Answer delay
Answer delay sets the number of times your D1110 will ring
before the answer machine picks up your call and starts playing
the outgoing message.
You can change this setting to between 2–9 rings or
The default setting is 5 rings.
d
Menu
Answer Machine
1. Press
, scroll
to
and press
d
Answer Settings
Select
2. Scroll
to
and press
u
d
Answer Delay
Select
3. Scroll
or
to
and press
u
d
4. Scroll
or
to the setting you want and press
Back
5. Press
to return to the previous menu level.
For more information on Time Saver, see "Switch your answer
machine on remotely" on page 19.
Switch message alert tone on / off
When you have new messages, with the audible message alert
switched on, you will hear an audible alert once at the handset and
the TAM base will beep every 10 seconds. The default setting is
Off.
d
Menu
Answer Machine
1. Press
, scroll
to
and press
d
Answer Settings
Select
2. Scroll
to
and press
u
d
Message Alert
Select.
3. Scroll
or
to
and press
u
d
On
Off
4. Scroll
or
to highlight
or
and press Select.
Back
5. Press
to return to previous menu or
to standby.
On-screen alert
When you have new messages, the display shows
messages
Back
. If you press
, the screen returns to standby and the
icon
is displayed.
u
d
Play
1. Press
and scroll
or
to the message you want to
Play
play. Press
to hear the highlighted message.
Select
.
.
Select
. When
in idle.
o
on the base.
Time Saver
.
Select
.
.
.
Select
.
Select
.
.
>
key to return
You have X new
17
Advertisement
Table of Contents
