Motorola D1000 Series Quick Start Manual

D1000 / D1010 Series
Quick Start Guide
1 Getting started
2 Using the phone
3 Help
This Quick Start Guide provides all the information you need to get you
started. If you need more detailed instructions, a full user guide is available
to download in PDF format from:
www.motorola.com/cordless-phones
Please consider the environment before printing.
Digital cordless phone D1000
Digital cordless phone with answering machine D1010
Getting started
Step 3. Charge the handset
• When the handset is fully
charged, plug the telephone line
• Insert the 2 x AAA NiMH
cord into the socket marked
batteries supplied into the
on the underside of the base
handset and slide the battery
and plug the other end into the
compartment into place.
telephone wall socket.
• Place the handset on the
charger and charge for at least
Warning!
24 hours. When the handset is
Use only rechargeable batteries.
fully charged, the icon is
If non-rechargeable batteries
displayed.
are used WARNING BATT
be displayed and charging will
be stopped. Please replace with
rechargable batteries.
Motorola D10 QSG EN v1.2.indd 1
All manuals and user guides at all-guides.com
Box Contents
D1001/D1011 D1001 base or D1011 base
handset
Mains power
adaptor for the base
with clear connector
2 x AAA NiMH Screws and
rechargeable wall plugs for
batteries wall mounting
Step 4. Select country Step 5. Set Date and Time
• After charging your phone, the
• Press
Welcome screen appears.
CLOCK/ALARM.
• WELCOME is displayed and
• Press
scrolls in different languages.
& TIME, then press
• Press . A list of countries is
• Enter the date using the format
shown on the display.
DD/MM.
• Scroll or to • Press
your country and press . time using the 24 hour format
will
HH:MM.
• Press to confi rm.
• Press
The handset and base will be reset
to load the correct settings and the
NOTE
standby screen is displayed.
If you have subscribed to your
network's Caller Display service, the
date and time is set automatically
for all handsets every time a call is
received.
Your phone is now ready for
use.
If you have purchased a multiple
pack you will also have the
following additional items:
D1002/D1012
• 1 x Additional handset and
charger
• 2 x AAA NiMH rechargeable
batteries
• 1 x Mains power adaptor for
charger with red connector.
D1003/D1013
• 2 x Additional handsets and
chargers
• 4 x AAA NiMH rechargeable
batteries
Telephone line cord
• 2 x Mains power adaptors for
charger with red connector.
D1004/D1014
D1000 / D1010 Series
Quick Start Guide
• 3 x Additional handsets and
chargers
1 Getting started
2 Using the phone
3 Help
This Quick Start Guide provides all the information you need to get you
started. If you need more detailed instructions, a full user guide is available
to download in PDF format from:
• 6 x AAA NiMH rechargeable
www.motorola.com/eu/radios/technicaldocumentation.
Please consider the environment before printing.
Digital cordless phone D1001
Digital cordless phone with answering machine D1011
batteries
Quick Start
• 3 x Mains power adaptors for
Guide
charger with red connector.
Handset
Earpiece
and scroll to
Display
Menu key
. Display shows DATE Enter the main menu.
Select the option displayed on
.
screen.
Confi rm menu option - OK is
displayed on screen.
Talk / Recall
and enter the
Make or answer calls
Use recall (R) functions
Navigator glow ring
lluminates when the phone is
to confi rm.
in use. Flashes to indicate new
event, eg. missed call.
*
/ Keypad Lock
Press and hold to lock/unlock
the keypad.
During a call, press and hold to
switch from pulse dialling to tone
dialling.
Dial a star
Handsfree key
Activate and deactivate the
loudspeaker during a call.
Intercom (at least 2
handsets needed)
In standby mode, use to make an
internal call.
During a call, use to transfer an
external call to another handset.
Getting started
Important Step 1. Set up the base
Only use the telephone line cord • Plug the mains power cable
supplied. This equipment is not (with a clear connector) into
designed for making emergency the socket marked
telephone calls when the power underside of the base and plug
fails. Alternative arrangements the other end into the mains
should be made for access to power wall socket.
emergency services.
Warning!
Use only rechargeable batteries.
• Switch on the power supply
Tip
Position the base at least 1
metre away from other electrical
appliances to avoid interference.
Putting it as high as possible
ensures the best signal.
Display icons
Call Log / Scroll up /
On when the line is in use.
Volume up
Flashes when there is an incoming call.
Open the calls log.
Scroll up through lists and settings.
Flashes when you have new voicemail messages.
Increase the earpiece volume
during a call. Off when you have no voicemail messages.
Redial / Scroll right / Clear
Flashes when you have missed calls and new number(s) in the
/ Mute
Calls list.
Open the redial list. Scroll to
the right.
Phonebook is open.
Delete characters on screen when
entering names and numbers.
Mute/unmute the microphone The alarm clock has been set.
during a call.
Go back to previous menu level Handsfree mode.
BACK is displayed.
Handset ringer is off.
Phonebook / Scroll down /
Volume down
Answering machine On. Off when answering machine is off.
Open the phonebook.
Flashes when you have new messages. Flashes fast when the
Scroll down through lists and
memory is full. (For D1010 series only)
menus.
Decrease the earpiece volume.
Steady when the handset is registered and within range of the
End / Exit / Switch handset
base. Flashes when the handset is out of range or searching for
on/off End a call.
base.
When in a menu, go back to
standby mode.
The approximate power levels of your battery are indicated as below:
Press and hold to switch handset
off (when in standby) or on.
Battery is fully charged.
# / Ringer Off / Pause
Battery is partially charged.
Press and hold to switch handset
ringer on and off.
Battery is running low.
When dialling or storing a
number, press and hold to enter
Flashes when battery is almost discharged. The handset will emit
a pause (P).
a warning beep during a call every 60 seconds.
Dial a #.
Important
The base station must be plugged
into the mains power at all times.
on the Do not connect the telephone line
cord into the wall socket until the
handset is fully charged. Only use
the power and telephone cables
supplied with the product.
Step 2. Connect the charger
(Multi-pack only)
• Plug the mains power cable
(with a red colour connector)
into the socket marked on
the underside of the charger
and plug the other end into the
mains power wall socket.
• Switch on the power supply.
02/09/2008