Samsung SNB-5000 User Manual page 73

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

IPv6 use : Specify the use of IPv6.

Mode : If you select <ipv6 use>, the mode is enabled.

IPv6 address : Obtains the IPv6 address to access the IPv6 network.

4. When done, click [Apply (
The IP addressing system will be defaulted to DHCP. However, if the DHCP server is still not found
J
after 1 minute, the IP system will switch to Static automatically.
port
1.
From the Setup menu, select the
<network ( )> tab.
2.
Click <port>.
3.
Type in each item in the Port menu as
necessary.
Neither the port range between 0 and 1023
nor port 3702 is available.
HTTP port : HTTP port used to

access the camera via the web
browser.
The default is 80(TCP).
VNP port : Set a port used to transfer video signals with the Samsung protocols.

RTSP port : Used to transfer videos in the RTSP mode; the default is 554.

Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.

Silverlight policy port : Silverlight is used to permit to acquire a network connec-

tion; the default is 943.
The port range of the Viewer is between 4502 and 4532. If the VNP port is with this effective
range, the Viewer port should be specified the same as the VNP port.
You cannot change the Viewer/Silverlight policy server port of a camera.
4. When done, click [Apply (
)].
)].
English _