porT rAnGe forwArD (porT mAppinG) SeTup
If you have installed an IP router with a camera connected, you must set the port range
forwarding on the IP router so that a remote PC can access the camera in it.
manual port range forwarding
1.
From the Setup menu of the IP router,
select <Applications & Gaming> -
<port range forward>.
For setting the port range forward for
a third-party IP router, refer to the user
guide of that IP router.
2.
Select <TCp> and <uDp port> for
each connected camera to the IP
router.
Each port number for the IP router
should match that specified in
<network> - <port> from the
camera's Setup menu.
3.
When done, click [Save Settings].
Your settings will be saved.
Above sample instructions are based on the CISCO's IP Router (Model: LINKSYS).
M
The settings may differ depending on the connected IP router model.
For more information, refer to the user manual of the applicable router.
English _