Table of Contents
Advertisement
Radio controls are used to turn the
set on and off and for station selec-
tion. For most pleasing stereo ef-
fect the speakers are criss-crossed,
with the left front and right rear
speakers reproducing the left chan-
nel and the opposite speakers re-
producing the right channel. Bal-
ancing the speakers is not required
as this adjustment has been made
at the factory. Should it become
necessary to make this adjustment,
see your Chevrolet dealer. The in-
dicator light will be on when the
radio is tuned to an FM stereo
Stereo Tape System
The optional Stereo Tape Player
provides prerecorded stereo pro-
grams for your enjoyment.
To play, turn ignition switch to
"ON" or "ACC" position and in-
sert cartridge through tape door
station. Most broadcasts on such
stations will be in stereo.
To Tune Your Stereo Radio
• Tune radio to an FM Stereo sta-
tion (one which makes the indi-
cator light come on).
• Turn the lever behind the sta-
tion selector knob until volume
from front and rear speakers
sounds equal.
• Regulate volume and tone con-
trols as required.
with label side up and open end in
first. Tape will play through all
four programs in succession, then
replay in same sequence. Balanc-
ing the speakers is not required as
this adjustment has been made at
the factory. Should it become nec-
essary to make this adjustment,
33
see your Chevrolet dealer.
1. Rotate Fader control unit vol-
ume until volume from front
and rear speakers sound equal.
2. Regulate volume control and
tone controls as desired.
3. To change program track, push
in volume control knob and
Advertisement
Table of Contents
