Table of Contents
Advertisement
164
Available operations
Rear e-dial (S)
d button
7
Press the 4 button.
The screen that was displayed in Step 3 appears again.
8
Press the 4 button.
The camera returns to the control panel.
You can also change the settings from the [A Rec. Mode 1] menu.
Saving the Cross Processing Settings of a Captured Image
5
The outcome of cross processing varies each time a picture is taken.
If a cross processed image that you like comes out, you can save
the Cross Processing settings used in that image. A total of three Cross
Processing settings can be saved.
1
Press the four-way controller (3) in the single image display
of playback mode.
The playback mode palette appears.
2
Use the four-way controller (2345) to select s (Save
Cross Processing), and press the 4 button.
The camera will search for cross processed images starting from
the most recent image taken. (An hourglass icon is displayed while
searching.) When a cross processed image is found, the screen
to save the settings appears.
If there are no cross processed images, the message [No cross
processed image] appears.
Switches between [Sharpness] and [Fine Sharpness].
Resets the adjustment value to the default setting.
Advertisement
Table of Contents
