Playback Menus - JVC GR-DA30U Instructions Manual

22
Menus for detailed adjustment
EN
The "SYSTEM" functions which are set when the Power Switch is set to "REC" are also applied
when the Power Switch is set to "PLAY".
Menus
LANGUAGE
MELODY
DEMO MODE
CAM RESET
The settings on the next page (
The parameters (except "SOUND L/R" and "NARRATION" settings) are the same as in the
description on page 21.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made,
and plays the sound back. Select the sound to accompany your playback picture.
Settings: [ ] = Factory-preset
[ENGLISH] / FRANCAIS / ESPAÑOL / PORTUGUÊS
The language setting can be changed. (
OFF: Disengages the function.
[ON]: A melody sounds when any operation is performed.
OFF: Automatic demonstration will not take place.
[ON]: Demonstrates certain functions such as Wipe/Fader and
Effects, etc., and can be used to confirm how these functions
operate. Demonstration starts in the following cases:
• When the Menu Screen is closed after "DEMO MODE" is turned
"ON".
• With "DEMO MODE" set to "ON", if there is no operation for about
3 minutes after the Power Switch is set to "REC".
• Performing any operation during the demonstration stops the
demonstration temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will resume.
Note:
If a cassette is in the camcorder, the demonstration cannot be turned on.
[CANCEL]: Does not reset all settings to the factory-preset.
EXECUTE: Resets all settings to the factory-preset.

Playback Menus

23) are effective only for video playback except "REC MODE".
12)
CONTINUED ON NEXT PAGE