JVC GR-DA30U Instructions Manual page 23

Menus
REC MODE
NARRATION
SOUND L/R
BLANK SEARCH
Each setting (except "OFF" in "ON SCREEN", "DATE/TIME" and "TIME CODE") is linked with
"DISPLAY", which appears when the Power Switch is set to "REC".
The parameters (except "OFF" in "ON SCREEN" setting) are the same as in the description on
21.
Menus
ON SCREEN
DATE/TIME
CLOCK ADJ.
TIME CODE
16:9 OUTPUT
BRIGHT
SYSTEM
Each setting (except "DEMO MODE") is linked with "SYSTEM", which appears when the Power
Switch is set to "REC".
The parameters are the same as in the description on
Menus for detailed adjustment
Settings: [ ] = Factory-preset
[SP]*/LP
Allows you to set the video recording mode (SP or LP) depending
on your preference. It is recommended you use "REC MODE" in
VIDEO Menu when using this camcorder as a recorder during
dubbing. ( 28, 29)
* SP indicator does not appear on the screen.
Although it is not possible to perform audio dubbing with this
camcorder, you can hear sound from an audio-dubbed tape during
playback using this function.
[OFF]: Original sound is output on both "L" and "R" channels in
stereo.
ON: Dubbed sound is output on both "L" and "R" channels in
stereo.
MIX: Original and dubbed sounds are combined and output in
stereo on both "L" and "R" channels.
[STEREO]: Sound is output on both "L" and "R" channels in stereo.
SOUND L: Sound from the "L" channel is output.
SOUND R: Sound from the "R" channel is output.
CANCEL / [EXECUTE]
17, "Blank Search".
Settings: [ ] = Factory-preset
OFF / [LCD] / LCD/TV
When set to "OFF", the camcorder's display disappears.
[OFF] / ON
12, "Date/Time Settings"
[OFF] / ON
15, "Time Code"
[4:3 TV] / 16:9 TV
21, "16:9 OUTPUT"
13, "Brightness Adjustment Of The Display"
22.
23
EN