Setting Up Your Wireless Settings - Motorola Fibe TV Reference Manual

Setting up your
wireless settings
Before you begin, be sure to write down the 8 digit WPA2 key, as indicated on
the back of the modem as you will need this to set up your wireless settings.
Windows® 7
• Click on the wireless bar located at the right hand side of the system bar.
• The list of available wireless networks appears with your network name.
Click Refresh network list if yours does not appear.
• Select your network name, and click Connect.
• Type your 8-digit WPA2 key in the Security key box, click ok.
Windows Vista®
• Click Start, then Connect to.
• Your network name will appear. If not, click the two arrows in the top right
corner.
• Type your 8-digit WPA2 key in the Security key or Passphrase text box.
• Click Connect.
Windows XP®
• Click the Wireless networks detected message or double-click
the icon in your system (located on the bottom right-hand side near
the clock).
• Your network name will appear. Double click it.
• In the wireless network connection box, type in your 8-digit WPA2 key.
• Click Connect.
Mac 10.4 – 10.6
• Click on the airport icon.
• Your network name will appear. If not, click the airport icon again.
• Click on your network name in the list.
• Type your 8-digit WPA2 key in the Password text box.
• Click ok.
For more information on creating a Wireless Home Network,
visit bell.ca/fibetvwireless.
22