Your Fibe Hd Pvr And Hd Receiver; Receiver Front Panel Image - Motorola Fibe TV Reference Manual

Your Fibe HD PVR and HD receiver

Once you've setup your Fibe HD PVR or HD receiver, indicator lights will show
you whether you're connected and receiving an HD signal or recording.
• You can have up to six receivers (one Fibe HD PVR and up to five
additional Fibe HD receivers) connected to TVs in your house.
• Use the buttons on the front of the Fibe HD PVR or HD receiver to navigate
the Fibe TV Guide and menus.

Receiver front panel image

1
8
key
1 PoWER
2
3
4
5 RECoRD
6
up and down
arrow keys
7 left and right
arrow keys
8 Model #
18
2
Item Function
If pressed briefly, turns the Fibe HD PVR or HD receiver on or off.
If held for fi ve seconds or longer, restarts the receiver.
light is green when the receiver is on.
uSB uSB 2.0 connector.
lINk light is green when connected to your home network.
HD light is blue when sending HD signal.
light is red when the Fibe HD PVR is recording one or more shows.
MENu Displays the menu.
Navigate the Bell Fibe TV Guide and menus. use these buttons while watching TV
to display the browse panel, allowing you to see what's playing on neighbouring
channels and in future time slots.
ok use the ok button to make choices and selections on any of the screens or menus.
Receiver model number
Fibe HD PVR is model # VIP1232
Fibe HD receiver is model # VIP1200
3 4 5 6 7