Smtp - Oki C9600dn Configuration Manual

Trap-18
Set the network address to which a trap packet is sent. Any address.
Default is 00000000000.
AdminManager
[Setup] →
...] → [IPX]
Web Browser
[Network] → [SNMP Trap] → [STEP2. Set Printer Trap
Address] → [IPX]
TELNET
[Setup printer trap] → [Setup IPX trap] → [IPX Trap net]

SMTP

The default setting is underlined.
SMTP-1
Enable/disable receiving E-mail via SMTP.
AdminManager
[Setup] →
Receive]
Web Browser
[Network] → [Email] → [Receive Settings] → [SMTP] → [To
STEP2] → [Domain FIlter]
TELNET
[Setup SMTP (E-mail)] → [SMTP Transmit]
[OKI Device Setup] → [SNMP] → [Printer Trap Setup
[OKI Device Setup] → [E-mail(Receive)] → [Use SMTP
Configuration: Configurable Items • 98
NOTE