EverFocus EDR810H Insruction Manual page 64

OFF: Disable quick play. Videos will start to be played from the end
point of the last play.
TIME: Quick play time, from 1 ~ 59 min. The default value is 10
minutes.
SYSTEM PASSWORD ENABLE:
YES: Select YES to enable the password function.
NO: Select NO to disable the password function.
PASSWORD and RIGHTS: The login passwords here are used to
operate and set up this machine locally not from the remote tcp/ip
connection. The different login passwords indicate the different level of
users, and no login name is necessary. The digit will appear instead of a "
＊" sign when the cursor is moved on it. Turn the Jog to change the digit
on which the cursor is located of the password, and press
ENTER/DISPLAY to go next/last digit. The available digits are 1, 2, 3,
4, 5, 6, 7, and 8. There are three system access levels and one none access
level. The below chart on the next page shows the rights of each level.
Note: If the passwords of different levels are set the same,
you will enter a higher level when you login. For example,
you will login to the ADMINISTRATOR level if the
password of ADMINISTRATOR and GENERAL levels are
the same.
•
Note: If you enable the system password levels and are logged in
any level higher then Level 1 with no action having taken place
after 20 seconds the DVR will automatically log you back into
Level 1.
Note: After upgrading system software, please do the following
actions before recording:
1. Load System Default in System Setup Menu.
2. Delete disk in Disk Setup Menu.
56