EverFocus EDR810H Insruction Manual page 25

END TIME: To set the end time of daylight saving time.
To set the end month of daylight saving time: Dial the jog to set the
end month.
JAN FEB
JUL AUG
To set the end week of daylight saving time: Dial the jog to set the
end week.
1 ST 2 ND
To set the end date of daylight saving time: Dial the jog to set the
end date.
SUN MON
To set the end time of daylight saving time: To set the end
"FROM" time and "TO" time of daylight saving time.
TIME SYNCHRONIZE: Select "ON" or "OFF" to enable or disable
time synchronize which can let you have correct time automatically when
network is connected. To change this, simply use the Jog Dial on the
DVR. Press the Enter key to make your selection.
TIME SERVER: You can set the time server address where you locate
if you connect to network and enable time synchronize. For checking the
IP address of NTP Server, please follow the steps:
1. Connect your PC to the internet for searching the IP address of
NTP Server.
2. Go to "START" -> "RUN" -> type "Command" and press
"OK"
Under Dos Prompt, type "C:\Ping Pool.NTP.ORG to find out
the IP address of NTP Server.
MAR APR
SEP OCT
3 RD 4 TH
TUE WED
17
MAY JUN
NOV DEC
LAST
THU FRI SAT