Headset Services - Motorola MC9500-K User Manual

Send Local Picture Window
Figure 7-32
Navigate to the picture to send to the other device.
4.
Tap Open.
5.
Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
6.
accept the picture. A Send Picture dialog appears.
Tap Ok.
7.

Headset Services

To connect to a Bluetooth headset:
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If problems
occur while connecting to the headset, place the headset in discovery mode. Refer to the headset user manual
for more information.
NOTE The headset tries to initiates the connection. If a connection is not established, then the Headset service is not
enabled.
Ensure the MC9500-K is connectable (required when automatic re-connect is initiated). See
1.
on page 7-36.
Ensure that the Headset Audio Gateway service is enabled on the MC9500-K (required when automatic
2.
re-connect is initiated). See
Use the Connection Wizard to search for a Bluetooth headset.
3.
Select the device and tap Next.
4.
Select the Headset service name and select Connect. The MC9500-K connects to the headset. Refer to the
5.
headset user manual for instructions on communicating with a Bluetooth device.
NOTE When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC9500-K.
Press the communication button on the headset. This routes both system and WAN call audio to the headset.
6.
When a call is received on the MC9500-K, tap the Accept button to answer the call.
7.
Press the communication button on the headset to route the audio back to the MC9500-K.
8.
Services Tab on page 7-37
for more information.
Using Bluetooth 7 - 29
Device Info Tab