Swapping Contacts
To swap contacts with another device:
NOTE Prior to swapping contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC9500-K is connectable.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
1.
OBEX Object Push Window
Figure 7-28
In the Action: drop-down list, select Swap Contact Information.
2.
Tap
. The Select Contact Entry window appears.
3.
Select Contact Entry Window
Figure 7-29
Select a contact to send to the other device.
4.
Tap OK.
5.
Tap OK to swap contacts with the other device and display a confirmation dialog box on the other device to
6.
accept the contact.
Tap Ok.
7.
Using Bluetooth 7 - 27