Motorola MC9500-K User Manual page 30

1 - 8 MC9500-K Mobile Computer User Guide
Four Bay Charge Only Cradle
•
Four Bay Ethernet Cradle.
•
Align and hook the MC9500-K interface pocket onto the cradle's or cable's cleat. The battery automatically begins
charging. See
Table 1-1
Battery Status LED
Battery Status LED
LED Charge Indicators
Table 1-1
Battery Status LED
Off
Slow Blinking Amber
(1 blink every 2 seconds)
Slow Blinking Red
(1 blink every 2 seconds)
Solid Green
Solid Red
Fast Blinking Amber
(2 blinks/second)
Single Blink Amber (when
Power button pressed)
The MC9500-K is equipped with a memory backup battery which automatically charges from the fully-charged
main battery. When using the MC9500-K for the first time, the backup battery requires approximately 36 hours to
fully charge. This is also true any time the backup battery is discharged, which occurs when the main battery is
removed for several hours. The backup battery retains RAM data in memory for at least 15 minutes (at room
temperature) when the MC9500-K's main battery is removed. When the MC9500-K reaches a very low battery
state, the combination of main battery and backup battery retains RAM data in memory for at least 48 hours.
for charging indications. The 4800 mAh battery fully charges in less than six hours.
Indicates that the:
battery is not charging
•
MC9500-K is not connected correctly to the cradle or not connected to a
•
power source.
cradle is not powered.
•
Indicates that a healthy battery is charging.
Indicates that an unhealthy battery is charging.
Indicates that a healthy battery is fully charged.
Indicates that an unhealthy battery is fully charged.
Indicates a charging error, e.g.:
temperature is too low or too high.
•
charging has gone on too long without completion (typically eight hours).
•
Battery depleted.
Indication