Bilge Pump; Fuel Tank & Fittings - Regal 2100 Owner's Manual

Cosmetic Care & Maintenance

Bilge Pump

The bilge pump is usually installed in the engine compartment just
below the engine front. Check for foreign materials stuck in the
strainer area or discharge hose.
Check all clamps and electrical connections for tightness. A quick check
of the bilge pump automatic fl oat switch is afforded by lifting up on
the fl oat and listening for the pump operating. Look around the fl oat
area for foreign debris and remove as necessary.
Fuel Tank & Fittings
Periodically inspect the fuel tank components at least annually for loose
clamps at the vent, fi ll and feed locations. Examine each hose for signs
of deterioration and leakage. Check the fuel sender for loose bolts, nuts,
and leaks at all areas of contact. Also, inspect the fuel tank for signs of
leakage or abrasion. Tighten all components as needed.
TYPICAL FUEL TANK
ANTI-SIPHON VALVE
HOSE CLAMPS
FUEL SENDER
FUEL FEED
FUEL FILL
FUEL VENT
7-19