Capacity Plate - Regal 2100 Owner's Manual

Introduction

Capacity Plate

Close to the helm on Regal boats up to 26' in length is a capacity
plate.
This plate represents manufacturers who participate in the National
Marine Manufacturer's Association small boat certifi cation program.
Your Regal boat model has been certified by NMMA approved
inspectors to be in compliance with their system guidelines along with
federal safety regulations. The driver of the craft shall read the plate
information before operating the vessel.
The capacity plate data applies under normal conditions. Be sure
to read and abide by the capacity limits. Remember, the boat
operator is responsible for the vessel and passengers.
Note the following typical capacity plate information below:
• The plate states the maximum number of persons allowed on the
boat.
• The total weight of persons, gear and other items under normal
conditions that the vessel is capable of carrying.
• Overloading, improper loading and weight distribution are well
documented causes of accidents. Provide for an extra margin of safety
in rough sea conditions.
INT-15