When printing data which spans multiple pages or
when printing data without pressing roll paper button
after printing one block of data, the margin between
data will be set to 0.
No Margins
Select Roll Paper as the Paper Source and check the
No margins box in the printer driver.
When printing is finished, press the
once to print a cutting guideline about 12mm from the
bottom of the print data.
To print the next print job, press the
to feed the paper back to the printing position, then
apply printing. In this case, the space between the two
blocks of print data will be 36mm.
When printing data which spans multiple pages or
when printing data without pressing roll paper button
after printing one block of data, the margin between
data will be set to 0.
For Windows users
Note:
When printing on roll paper, you cannot use the Reverse Order
or Rotate by 180° features, select Maximum or Centered as the
Printable Area setting, or use the functions on the Layout menu.
Do not select PhotoEnhance in the printer software, as this may
cause offsets in the print area at logical page boundaries.
2-6
Using Roll Paper
z
roll paper button
z
roll paper button