Safety Instructions; Important Safety Instructions; When Setting Up Your Printer - Epson Stylus Photo 1290 User Manual

Safety Instructions

Important Safety Instructions

Read all of the instructions in this section before using your
printer. Also, be sure to follow all warnings and instructions
marked on the printer.

When setting up your printer

Observe the following when setting up the printer:
Do not block or cover the openings in the printer's cabinet.
Use only the type of power source indicated on the printer's
label.
Connect all equipment to properly grounded power outlets.
Avoid using outlets on the same circuit as photocopiers or air
control systems that regularly switch on and off.
Avoid electrical outlets controlled by wall switches or
automatic timers.
Keep the entire computer system away from potential sources
of electromagnetic interference, such as loudspeakers or the
base units of cordless telephones.
Do not use a damaged or frayed power cord.
If you use an extension cord with the printer, make sure that
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating. Also,
make sure that the total ampere rating of all devices plugged
into the wall outlet does not exceed the wall outlet's ampere
rating.
Safety Instructions
4