Epson Stylus Photo 1290 User Manual page 66

4. Specify the width of the binding margin by entering a value
in the Binding Margin text box. You can specify a value
between 3 mm and 30 mm.
Note:
The actual binding margin may vary, depending on your
application. Experiment by printing a few sheets using different
binding margin values before printing the entire job; otherwise, the
results may differ from what you expect.
5. Click OK to return to the Layout menu, then click OK to save
your settings.
6. Load paper in the sheet feeder, then send the print job from
your application. While the printer is printing the odd-
numbered pages, instructions are displayed which explain
how to reload the paper correctly.
7. Follow the instructions to reload the paper, or reload the
paper as shown in the illustration below.
Note:
The paper may curl during printing, depending on the amount
of ink used to print text and images. Flatten it or curl it slightly
toward the opposite side before printing on the other side of the
paper.
Tap the stack of paper on a flat surface to align the edges before
reloading it.
Reload the printouts as instructed; otherwise, the paper may
jam or the binding margin may differ from what you expect.
3-28
Printing with Windows