Oil Filter - Honda 1981 GL1100 interstate Owner's Manual

4. Fill the crankcase with approximately
3.2 liters (3.4 U.S. quarts) of the recom-
mended grade oil and install the oil filer
ca p .
5. Start the engine and let it idle for a
few minutes.
6. Stop the engine. Make sule the oil
level is at the upper level mark and
there are no oil leaks.
NO T E :
When running in very dusty conditions,
oil ohanges should be pelformed more
fiequently than specified in the marn-
tenance schedule.
lnsert a new oil filter element. Check
that the O-rings are in good condition
and that all parts.are installed as shown.
Install the oil filter cover and tighten
the oil filter bolt.
Oil Filter Bolt Torque:
2 .'7 3 .3 ke-'n (20-24 ft-lb)
Perform steps 4 lo 6 of Engine Oil
Change.
aos
2.
3 .
4.
OIL FILTER
N OT E :
i
l
lL
* Changc the oii
lilter
engine oil.
l. Remove the oil filter
the oil filter element
oil filter cover.
after draining
bolt, and pull
(l ) ou t of the
{ l)
tr ilter element
( 2) O- ri ngs
69