Rearwheel R Emoval - Honda 1981 GL1100 interstate Owner's Manual

REAR WHEEL REMOVAL
1. Place the motorcycle on its center
stand.
2. Support the rear wheel so it will not
drop when the shock absorbers are dis-
connected.
3. Remove the cotter pin (l) from the
axle and remove the axle nut (2).
4, Remove the axle holding bolt (J).
5, Remoye the lower shock absorber nut
(right side) and bolt (4: left side),
6. Raise the rear wheel so the axle will
clear the muffler.
7. Pull out the rear axle (5).
* Support the coliper assemblY and
arm before removing the rear
that it does not hang ftom the
hose. Do not twist the brake hose.
8. Remove three final drive case nuts
9. Move the wheel backward.
10. Separate the final ddve case from
wheel.
(6) Fioal drive case nuts