Grease Filters - Miele DA 420 V Operating And Installation Instructions

Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls)
Stainless steel surfaces can be cleaned
with a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel.
To prevent immediate resoiling, the
Original Miele care product for stainless
steel can be purchased from Miele or at
www.miele-shop.com. Apply sparingly
with a soft cloth following the
instructions on the packaging.
If too much is applied, streaking
may occur in the area of the
extendable tower.
Important instructions for the controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long.
Remove soiling straight away.
Observe the "General notes" on
cleaning earlier in this section.
Do not use stainless steel cleaning
agents on the controls.
Cleaning and care

Grease filters

The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
rangehood.
The grease filters should be cleaned at
the latest when the Grease filter touch
control lights up.
To avoid a build-up of fat, it should be
cleaned every 3-4 weeks on average,
but sooner if necessary.
,
An oversaturated filter is a fire
hazard.
^ To take out the grease filters, release
the locking clip on the filter, lower the
filter approx. 45°, unhook it at the
back and remove it.
To avoid damaging the filter or the
cooktop below, make sure you hold
the filter securely at all times when
handling it.
23