Table of Contents
Advertisement
Cleaning and care
Panels and grease filters for
edge extraction
The edge extraction panels and the
reusable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapors, preventing soiling of the hood.
Risk of fire
Oversaturated grease filters are a fire
hazard.
Clean the grease filters at regular
intervals.
Cleaning intervals
Accumulated grease solidifies over a
longer period of time and makes
cleaning more difficult. The grease
filters should therefore be cleaned every
3 to 4 weeks.
The filter saturation indicator reminds
you to regularly clean the grease filters
by illuminating the grease filter
symbol .
You can adjust the interval for the filter
saturation indicator to match your
cooking habits (see "Operation
(Automatic and Manual modes)").
Removing the panels and grease
filters
The grease filters and panels can
fall out when you are handling them.
This can result in damage.
Make sure you hold the filters and
panels securely at all times when
handling them.
24
DA 6596 D: Pull the front edge of the
panels down out of the lock, lower
them slightly, unhook them at the
back, and take them out.
DA 6526 D: Pull the outer edge of the
panels down out of the lock, lower
them slightly, unhook them in the
middle, and take them out.
To remove a grease filter, release the
locking clip. Then, open the filter to a
45° angle, unhook it, and remove it
from the hood.
Advertisement
Table of Contents
